We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Pot Scrubbers as Filter Media: A Reef Keeper’s Guide to Using Them Safely

Learn how pot scrubbers as filter media work in a reef sump, how to prep and place them, and which mistakes to avoid before you add them to your tank.

Updated November 2026

Pot scrubbers as filter media are a low-cost way to give your sump extra surface area for beneficial bacteria and trapped debris. This guide explains how to prepare them, where they fit in your filtration setup, and the mistakes that can quietly raise nutrient levels in a reef tank. Used with care, they work well as a supplement to mechanical and biological filtration.

What Pot Scrubbers Do in a Reef Sump

Most pot scrubbers are made from stainless steel or copper-free polyester-style mesh, and they are sold for kitchen cleaning. In a sump, their fine, looping strands create many small surfaces where bacteria can colonize. They also catch fine particulate that drifts through a return line. The benefit is real, but it is modest. A scrubber is not a substitute for a protein skimmer, regular water changes, or a properly sized biological media bed.

Preparing Scrubbers for Use

Raw scrubbers often carry soap residue, oils, or manufacturing coatings. Skipping prep can release contaminants into your water. Follow these steps before you place them in the sump:

  1. Rinse each scrubber under hot tap water until no suds or odor remain.
  2. Soak the scrubber in a bucket of tank water (not fresh tap water) for 24 to 48 hours.
  3. Squeeze out excess water and check for loose wires, sharp edges, or flaking coatings.
  4. Discard any scrubber that sheds fibers or smells strongly of chemicals.

Placement and Flow Considerations

Position scrubbers in a chamber where water moves through them without being forced. Good spots include the first or second compartment after the skimmer section, or a dedicated media basket. Avoid placing them directly under the return pump outlet, where high flow can tear strands loose.

Keep the media loosely packed. A dense ball compresses at the bottom and starves the center of flow, which creates dead spots where detritus rots. Fill the basket about two-thirds full and check that water passes freely through every section.

How Often to Clean and Replace

Rinse scrubbers in tank water every two to four weeks, depending on bioload. Rinsing in tap water kills the bacterial colony you are trying to grow, so always use removed tank water. Plan to replace scrubbers when they break down, usually after several months, because degraded mesh traps waste faster than it processes it.

Monitoring Results in Your Tank

Test nitrate, phosphate, and alkalinity weekly for the first month after adding scrubbers. A rise in phosphate or nitrate after installation means the media is trapping more waste than your system can export. Pair the scrubbers with a skimmer and a routine maintenance schedule so the extra surface area does not become a nutrient reservoir.

Common Mistakes and Tips

  • Skipping the soak step and introducing soap or coating residue into the sump.
  • Rinsing scrubbers in fresh tap water, which strips the beneficial bacteria.
  • Packing the basket tightly enough to create dead zones with no flow.
  • Letting scrubbers accumulate detritus for months without cleaning.
  • Treating scrubbers as a replacement for skimming or water changes.

A sturdy media basket keeps scrubbers in place and simplifies cleaning. Look for one sized to your sump chamber, so the media stays submerged and in the flow path. View on Amazon

A flow-safe return pump with an adjustable outlet helps you control turbulence around the scrubbers. Owners often report that a gentler outlet reduces strand damage. View on Amazon

FAQ

Can pot scrubbers replace a protein skimmer?

No. Scrubbers trap some particulate and add bacterial surface area, but they do not remove dissolved organics the way a skimmer does. Keep a skimmer running for reliable export.

Do pot scrubbers need to be cured before use?

Yes. A soak in tank water for one to two days removes residue and lets the surface start collecting bacteria safely.

How do I know if scrubbers are causing a nutrient problem?

If nitrate or phosphate rises after installation and does not fall after cleaning, the media is likely holding more waste than your system exports. Remove some scrubbers, clean the rest, and retest. For sump design questions, see 5 Best Sump Filters for Aquarium Options Compared (2026).

Conclusion

Pot scrubbers as filter media can add useful surface area and trap fine debris when they are prepared, placed, and cleaned correctly. Treat them as a supplement, not a replacement for skimming and regular water changes. If you notice nutrient trends moving the wrong way, consult an experienced reef keeper or aquarium professional before making major changes.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our reef & saltwater aquariums guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for My Reef Aquarium.