We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Magnetic Coral Frag Rack: How to Choose and Use One Safely

Learn how a magnetic coral frag rack works, how to pick the right one for your reef tank, and how to set it up without damaging your frags. Read the guide.

Updated November 2026

A magnetic coral frag rack holds small coral fragments in place inside your display or sump so you can grow them out, photograph them, or keep them safe while you work on the tank. This guide walks through what to look for in a magnetic coral frag rack, how to position it, and how to keep your frags healthy once they are mounted.

What a Magnetic Coral Frag Rack Does

Most frag racks use a pair of magnets: one sits on the outside of the glass and the other sits on the inside, attached to a plastic or acrylic holder. The outer magnet pulls the inner unit into place, so you can reposition frags without reaching into the water and without scraping the glass. Racks come in several sizes, typically holding anywhere from a handful of small frags to a larger set of plugs and mounts.

Shopping for one? See our guide: 3 Best Coral Box Auto Top Off Systems Compared for Reef Tanks (2026).

How to Choose the Right Magnetic Coral Frag Rack

Start by matching the rack to your glass thickness. Magnet strength depends on the distance between the two halves, so a rack that holds firmly on 1/4-inch glass may slip on thicker panels. Check the manufacturer’s stated glass range before you buy.

  • Glass thickness range: confirm it covers your tank’s panels.
  • Holder material: acrylic and food-safe plastics are common in reef use; avoid anything that is not rated for saltwater.
  • Frag capacity: count your current frags and leave room for growth.
  • Clip or slot design: look for firm grips that will not release a frag during flow changes.
  • Magnet safety: keep the outer magnet sealed and out of reach of children and pets.

Setting Up Your Frag Rack Step by Step

Install the rack during a water change or when you have time to watch the frags for a few hours afterward. Work quickly but gently, and keep your hands in the water only as long as needed.

  1. Choose a spot with moderate flow and no direct hit from a powerhead outlet.
  2. Set the inner holder against the glass first, then bring the outer magnet into position on the outside.
  3. Check that the holder sits level and does not rock when you tap it.
  4. Mount each frag using the clip or slot, making sure the coral faces the light.
  5. Watch the frags for 15 to 30 minutes and confirm none are touching or shading each other.

Placement and Lighting

Place frags where they receive the light intensity they need. Stony corals generally need more light than soft corals, so group frags by light requirement rather than mixing them on one rack. Keep the rack at least a few inches below the surface if the light above is strong, and check your frags after the first few days for signs of stress.

Flow and Maintenance

Keep frags out of dead spots where detritus settles, but also avoid placing them directly in strong flow that can tear tissue. Clean the glass around the rack during routine maintenance, and remove any algae that builds up under the holder.

Common Mistakes to Avoid

  • Using a rack that is too weak for your glass thickness, which can let frags slide during a flow change.
  • Crowding frags so that growing colonies shade or sting their neighbors.
  • Leaving the outer magnet loose or uncovered where it can be knocked off.
  • Moving frags without checking their tissue afterward, which can hide early signs of damage.
  • Placing racks in high-flow spots that stress newly cut frags.
  • Magnetic frag rack set: a practical starting point for holding small frags in a display tank. View on Amazon
  • Acrylic coral frag plugs: useful for mounting frags on the rack and keeping them stable. View on Amazon
  • Glass-safe cleaning magnet: helps you clean the inside of the glass without reaching into the tank. View on Amazon

FAQ

How strong should the magnets be for my tank?

Match the magnet rating to your glass thickness, since stronger magnets are needed for thicker panels. Check the manufacturer’s stated range and choose a set that fits your tank rather than the strongest option available.

Can I use a magnetic frag rack in a sump?

Some racks are designed for display panels only, so confirm compatibility before using one in a sump. Sump walls are often thinner or differently shaped, which can affect how well the magnets hold.

How often should I check the frags on the rack?

Check them daily for the first week after mounting, then at least a few times a week after that. Look for tissue retraction, color changes, or frags shifting position, and consult an experienced reef keeper or a qualified aquarist if a coral appears to be declining.

Conclusion

A magnetic coral frag rack gives you a clean, reversible way to hold frags in place without repeatedly reaching into the tank. Match the rack to your glass, mount frags with attention to light and flow, and watch them closely after each change. With those basics in place, your frags will have the stable footing they need to grow.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our reef & saltwater aquariums guides, checking product details against manufacturer specifications and owner feedback.

About the author

Caleb Morgan
Caleb Morgan

Caleb Morgan writes reviews and buying guides for My Reef Aquarium.