Diatoms in Reef Tank: How to Identify, Prevent and Clear Brown Algae
Learn why diatoms in reef tank setups appear, how to tell them from other algae, and the steps to clear the brown film and prevent it from coming back.
Updated November 2026
Diatoms in a reef tank usually show up as a brown, dusty film on glass, sand, rock and coral skeletons, especially in new systems. This guide explains what diatoms are, how to confirm you are dealing with them, and how to clear them without stressing your livestock. The fix is mostly about silicates, light and nutrients, not a single product.
What Diatoms Are and Why They Appear
Diatoms are single-celled algae with silica (silicate) shells. They feed on silicates that enter your system from tap water, sand, rock, glass cleaning, and some salt mixes or media. Because they need silicate and not much light, they often bloom in tanks that are less than a few months old, while the biological filter and coralline algae are still establishing.
Shopping for one? See our guide: Algae Scraper vs Magnet: Which Is Better for Your Reef Tank?.
Diatoms are typically brown and feel powdery or slimy when you rub them. Cyanobacteria, by contrast, is often slimy and can be blue-green or red, while brown diatom film is easy to wipe away. Worth reading next: Reef Tank Algae Eaters: 6 Species That Clean Up Nuisance Algae (2026).
Step-by-Step: Clearing a Diatom Bloom
- Test your source water and system for silicate. Many test kits can measure it, and tap water with high silicate is a common cause.
- Switch to RO/DI water for top-offs and water changes if you have not already. Confirm that your RO/DI membrane and resin are in good shape.
- Scrub the glass and manually remove as much film from rock and sand as you can during a water change. Siphon sand gently rather than stirring it up.
- Add a silicate remover resin to a filter bag or reactor in your sump. Replace the resin as the manufacturer directs, since spent resin stops working.
- Keep lights on a normal schedule. Diatoms are not strongly light-driven, but you should avoid over-lighting, which can push other algae forward.
- Do not use a sudden large dose of chemicals. Rapid changes can stress corals and fish more than the diatoms do.
Preventing Diatoms From Coming Back
Once the silicate source is controlled, the bloom usually fades over one to several weeks. Prevention matters more than cleanup, so focus on the inputs. Use a silicate-free salt mix if your current one tests high, and check any new rock or sand you add. Keeping nutrients balanced also helps, because a healthy population of coralline algae and corals competes for the same space and resources. You may also like Black Algae Reef Tank Fixes: 3 Best Products to Clear It.
Good water flow is important too. Flow keeps detritus suspended so your protein skimmer can remove it, and it prevents dead spots where film builds up. For help with flow, see Wave Maker Placement in Aquarium: A Step-by-Step Guide for Reef Tanks and Wave Maker Aquarium 100cm: How to Pick, Place and Tune Flow for a Reef Tank.
Your skimmer also plays a role. Removing organics before they break down reduces the nutrient load that feeds algae of all kinds. The skimmer basics are covered in What Is a Protein Skimmer Used For in a Reef Tank? Uses and Benefits, and tuning steps are in Tuning a Protein Skimmer: A Step-by-Step Guide for Reef Tanks.
Common Mistakes
- Assuming all brown film is diatoms without checking whether it wipes off easily.
- Using tap water for top-offs when silicate levels are high.
- Leaving spent silicate resin in the system.
- Scrubbing so hard that you release a cloud of detritus and cause a nutrient spike.
- Expecting a bloom to vanish in a day rather than over several weeks.
Recommended Gear
- Silicate removal resin helps pull silicate out of your water so diatoms have less to feed on. View on Amazon
- Algae scraper or magnetic cleaner lets you remove film from glass and rock without a messy wipe-down. View on Amazon
- Silicate test kit tells you whether your source water or tank is feeding diatoms. View on Amazon
FAQ
Are diatoms harmful to corals and fish?
Diatoms are generally not toxic, but a heavy film can cover coral tissue and reduce light reaching your corals. Clear it promptly so it does not smother new growth. Top 5 Algae Bloom in Reef Tank Fixes Compared for Faster Control goes further into this.
How long does a diatom bloom last?
Many tanks clear within one to several weeks once silicate inputs are controlled. Persistent blooms usually mean a silicate source is still present.
Can I just let diatoms burn off with more light?
More light is not a reliable fix and can encourage other algae. Address silicate and nutrients first, and consult an experienced reef keeper or a professional if the problem persists.
Conclusion
Diatoms in a reef tank are a sign that silicate is entering your system, most often from tap water, sand or rock. Confirm the film is diatoms, remove the silicate source, clear the film with regular cleaning and resin, and keep water flow and skimming strong. With the inputs under control, the bloom should fade and stay gone.
Ready to choose one?
